Brake Spares Dia-Compe

Genuine Dia-Compe M5 Cut Anchor Bolt with Nut Material: Steel Sold: Individually Size: M5 (threaded diameter) X 0.8 (thread pitch) X 12mm (length) Fits: 883 calipers and possibly others that need the cut out on the bolt head to fit flush...

Brand: Dia-Compe Sold: Individually For: Front of Caliper Axle Nut Size: M6 Suit: Most Calipers Finish: Chrome Plated

Replace that rust old centre bolt & nut on your Dia-Compe 750 caliper with a brand new set Includes 1 x New Centre Bolt 60mm Long 2 x Half Moon Washers 1 x Flat 3mm washer 1 x Washer 1 x Nut Please note: 750 calipers came with 2 different size...

Replace that rust old centre bolt & nut on your Dia-Compe 750 caliper with a brand new set Includes 1 x New Centre Bolt 40mm Long 2 x Half Moon Washers 1 x Flat 3mm washer 1 x Washer 1 x Nut Please note: 750 calipers came with 2 different size...

Replace those rust old springs on your Dia-Compe 750 caliper with a brand new set Sold in: Pairs

Replace those rusty old side bolt & nut on your Dia-Compe 750 caliper with a brand new set Includes 2 x New Side Bolts 4 x Plastic Inner Sleeves 2 x Steel Sleeves 2 x Washers 2 x Nuts  

Brand; Dai-Compe Material: Steel Hole Size: M6 Sold: Individually Suits: Most Calipers

Dia-Compe DC750 Replacement Centre Cable Material: Stainless Steel Sold: Individually Suits: DC750 Calipers Length: 110mm end to end

Brand; Genuine Dia-Compe Model: Logo Washer Size: 16mm OD with hole for 6mm standard axle  Suits: MX890, MX883, MX884, MX1000 and many other Dia-Compe Callipers Sold: Individually

Brand: Genuine Dia-Compe Material: Steel & Alloy Suits: MX120, MX121, MX122, MX123, MX128 Levers and many more inluding many Shimano Levers Sold As: Set - 1 Nut, Washer & Bolt (enough to do 1 lever) Perfect for when doing a resto on an...

Dia-Compe Cable Hanger - For Cantilever, U-brake and other Center Pull Brakes Material: Aluminum Stamped: Dia-Compe Sold: Individually Comes with nut & bolt

Dia-Compe Brake brake caliper axle dress up cone nut Most every caliper brake with a acorn/cap nut on the front uses this size, but always measure to be sure. These can be used as a dress up item for the MX1000, MX890 & MX883 calipers we sell or...

Dia-Compe Brake brake caliper plastic nut cover Most every caliper brake with a acorn/cap nut on the front uses this size, but always measure to be sure. These can be used as a dress up item for the MX1000, MX890, MX883 calipers we sell or original...

Brand: Genuine Dia-Compe Suits: MX883, MX884, MX890 & MX1000 and most old school brake calipers Material: Steel Colour: Chrome Sold: Individually

Dia-Compe front brake recessed nut for freestyle. This is the type nut needed for forks that have a recessed bolt hole so that the brake can be mounted flush (so that there is not a nut to interfere with freestyle tricks). This type of recessed nut...

Brand: Genuine Dia-Compe Sold: Individually Suits: Front Freestyle MX883 & MX884 Caliper With Upward Routed Cable Finish: Chrome & Black

Brand: Genuine Dia-Compe Sold: Individually Suit: Current MX1000 & MX883 Caliper and may also suit the old style and other brands Finish: Chrome & Black

Genuine Dia-Compe Chrome replacement quick-release for Front brake (UPWARD routed cable as with a freestyle installation of the brake cable through a Potts Mod) These are the ones Dia-Compe currently uses on the 883 brakes. Replace your rusty/pitted...

Genuine Dia-Compe Chrome replacement quick-release for Front or Rear brakes with down-routed cable. This is a quick release mechanism for a rear side-pull brake caliper. These are the ones Dia-Compe currently uses on the 883 brakes and also suit the old...

Brand: Genuine Dia-Compe Sold: Individually For: Front Thread: M6 Suit: Most Side Pull Calipers Including MX883, MX890, MX900 & MX1000 Finish: Yellowish Zine Plated

Brand: Genuine Dia-Compe Sold: Individually For: Rear Thread: M6 Suit: Most Side Pull Calipers Including MX883, MX890, MX900 & MX1000 Finish: Yellowish Zine Plated

Brand: Genuine Dia-Compe Item: Caliper Washer Thin Plastic Material: Plastic Sold: Individually Suits: Most Calipers

Brand: Genuine Dia-Compe Item: Caliper Washer Thin Steel Material: Steel Sold: Individually Suits: Most Calipers

Brand: Dia-Compe Size: 3mm thick Sold: Individually Suit: Rear Flat Brake Bridge (Mongoose etc)

Brand: Dia-Compe Size: 5mm thick Sold: Individually Suit: Rear Flat Brake Bridge (Mongoose etc)

Brand: Dia-Compe For: Front (Shallow Radius To Suit Front Forks) Material: Aluminium Sold: Individually   

Brand: Dia-Compe For: Rear (Deep Radius To Suit Rear Brake Bridge) Material: Aluminium Sold: Individually - If you need a pair order 2

Genuine Dia-Compe rivet and washer for installation of quick release mechanism on BMX side pull brake calipers. Necessary if you are reassembling a restored caliper, installing a quick release as an upgrade or replacing a lost/damaged rivet. Brand:...

Genuine Dia-Compe rivet and washer for installation of quick release mechanism on BMX side pull brake calipers. This particular style is for the type of quick release that comes on the new re-issued Dia-Compe MX1000 brakes. Necessary if you are...

Brand: Genuine Dia-Compe Suit: 990 Caliper Rebuild Kit

Brand: Dia-Compe Suit: 990 Caliper Rear Cable Length: 380mm

Brand: Dia-Compe Suit: 990 Caliper Colour: Silver Sold: Individually

Brand: Dia-Compe Suit: 990 Caliper Item: Barrel Adjuster Colour: Silver Sold: Individually

Brand: Dia-Compe Suit: 990 Caliper Item: U-Brake Mounts Colour: Silver & Black Sold: Pair

Brand: Genuine Dia-Compe Suits: U-Brake Arm Sold: Individually

Brand: Genuine Dia-Compe Suits: U-Brake Arm Sold: Individually

Brand: Genuine Dia-Compe Suits: Dia-Compe Tech-77 Lever Decal Material: Chrome Foil Decal With Translucent Red Ink Sold: Individualy 

Brand: Genuine Dia-Compe Suits: Dia-Compe DC750 Calipers Material: Chrome Foil Decal With Translucent Red Ink Sold: Individualy 

Brand: Genuine Dia-Compe Suits: Dia-Compe MX1000 Calipers Material: Chrome Foil Decal With Translucent Red Ink Sold: Individualy